UltraSn0w
Latest
Newest version of ultrasn0w unlocks iPhone 4, 3GS on iOS 5.1.1, RedSn0w 0.9.12b1 also released
Are you one of those folks who depends heavily on an iPhone 4 / 3GS unlock, but made the unsafe trip toward iOS 5.1.1 territory? Worry no more, as the hard-working Dev-Team's come through yet again, delivering its newest version of ultrasn0w to help alleviate your carrier lockdown problems. Version 1.2.7 of the unlocking method is friendly with iPhone 4s (nope, not the 4S) on baseband 01.59.00, while the older 3G / 3GS slabs will have to be on 04.26.08, 05.11.07, 05.12.01, 05.13.04 or 06.15.00. To go along with the latest ultrasn0w release, the Dev-Team also outed a fresh copy of RedSn0w (0.9.12b1) for both Windows and Mac, making it easier for devices sporting Cupertino's A4 chip -- and other earlier ones -- to adopt and restore using an untethered solution. All in all, we'd say it's a pretty good day for the jailbreak scene. [Thanks to everyone who sent this in]
Edgar Alvarez06.04.2012
ultrasn0w bumped to version 1.2.5, now unlocking even more iOS 5.0.1 devices
Given that you're out on Christmas break and all, isn't it about time you finally tried out that whole "unlocking" thing you've been hearing about? A new build of ultrasn0w just hit the Cydia app store, with v1.2.5 adding more support for iOS 5.0.1. Of note, novice jailbreakers may want to reach out to more experienced pals before embarking, as you'll need a a compatible baseband in order for the unlock to work. The iPhone 3GS (running iOS 5.0.1.) is supported with the following basements: 04.26.08 – 05.11.07 – 05.12.01 – 05.13.04 – 06.15.00. The iPhone 4 is supported if your baseband checks in as 01.59.00. If you're looking to upgrade from a dustier firmware, make sure you preserve your baseband before unlocking. Hit the source link for a few tips, and remember: friends don't let friends jailbreak before completing a backup.
Darren Murph12.21.2011
iPhone 3G, 3GS get iOS 4.2.1 unlock, using risky ultrasn0w workaround
Can't wait another minute for your iPhone 3G or iPhone 3GS to be carrier-unlocked once more? If and only if you're already running the latest firmware, you can actually pilfer a bit of iPad code to pick the requisite locks -- though there are some serious risks in doing so. The iPhone Dev Team has a new version of PwnageTool that uses the 6.15.00 baseband from iPad firmware 3.2.2, which just so happens to run perfectly on the iPhone 3G and 3GS since both phones and tablets of that era use the same Infineon radio chip. If you know your way around an IPSW and regularly bench-press SHSH blobs, you can download all the software you need right now -- but if you don't, you might want to steer clear of the proceedings for the time being. We spoke about risks a moment ago, and in this case there are quite a few -- like the inability to downgrade from baseband 6.15 or ever do a full restore unless Apple relations improve, and it's fairly likely that Cupertino won't look kindly on your warranty if they find you running iPad software. Them's the breaks, kid.
Sean Hollister11.28.2010
iOS 4.2.1 Jailbreak hits with updated redsn0w
The Dev-Team Blog was just updated with a new redsn0w version 0.9.6b4 jailbreak (based on Geohot's Limera1n bootrom exploit) for iOS 4.2.1. Unfortunately, iOS device owners won't find jailbreaking as easy as navigating to a website. And the 4.2.1 jailbreak is currently "tethered" so owners of the iPhone 4, iPad, and newer iPhone 3GS and iPod touch models will have to reattach to a PC or Mac to boot into a jailbroken state each time your device loses power or needs a reboot. Those of you who rely on the ultrasn0w unlock should hold off for now -- good advice for anyone not comfortable with terms like "SHSH blobs" or "Cydia." Everyone else can hit up the link below with a detailed how-to provided by Redmond Pie.
Thomas Ricker11.23.2010
iPhone 4 unlock now available
Here's good news for iPhone 4 users who've been waiting for a carrier unlock. The iPhone Dev Team has released an update to Ultrasn0w, its iPhone unlocking client, that's compatible with the iPhone 4. When run on an jailbroken iPhone 4, Ultrasn0w will allow you to use a carrier other than AT&T in the US. It's a very simple process, as the video above demonstrates. Just note that jailbreakme.com is used in the demonstration, which makes use of a PDF exploit found in the iOS software. Also, jailbreaking your iPhone may void its warranty; proceed entirely at your own risk. The Dev-Team first announced that they had been able to unlock the iPhone 4 last month, but only released the updated version of Ultrasn0w now. If freedom from AT&T is your thing, have at it. [Via Macworld]
Dave Caolo08.05.2010
iPhone 4 unlock available now (update: video!)
var digg_url = 'http://digg.com/apple/iPhone_4_unlock_is_now_available'; It's the moment that many of you have been waiting for: the Dev-Team's ultrasn0w carrier unlock for iPhone 4 is out. You'll find version 1.0-1 of ultrasn0w in Cydia on jailbroken devices. If not, just add the repo666.ultrasn0w.com repository. It works for iPhone 4 baseband 01.59 and 3G/3GS basebands 04.26.08, 05.11.07, 05.12.01 and 05.13.04. If none of this makes sense then you've got no reason unlocking your device in the first place, buddy. Update: No-nonsense video embedded after the break showing how to jailbreak and unlock. Easy peasy. [Thanks, Adam]
Thomas Ricker08.04.2010
iPhone 4 unlocked, says Dev Team member
It took some doing, but the iPhone 4 has been unlocked. Unfortunately, you can't get your hands on what you'll need to do it yourself just yet. A member of the iPhone Dev Team who goes by PlanetBeing has posted a picture of an iPhone 4 on Canada's Bell network. The feat was made more difficult with the iPhone 4 because iOS 4 on AT&T needed a soup-to-nuts rewrite of ultrasn0w. We don't have a timeline for when the updated ultrasn0w and Spirit will be released, so we'll keep our ears pressed to the ground on that one. For now, at least one iPhone 4 is flying free in Canada! Spread your wings, little iPhone, and keep those Canadians away from your lower left-hand corner.
Dave Caolo07.13.2010
PwnageTool 4.0 hacktivation is go for iOS 4
You waited patiently for the Dev-Team to pull together all the developer betas and now it's time for your reward: PwnageTool 4.0 has been released. The latest hack from team jailbreak works with previously jailbroken iPhone 3GS devices with the old bootrom, all iPhone 3G models, and yes, the second generation iPod touch too. It doesn't work with the original iPhone and other iPod touch models and, as always, there are plenty of caveats and bold print warnings to heed. But if you manage to weave your way into a jailbroken device (as we did with our iOS 4 iPhone 3G using redsn0w) then the latest copy of ultrasn0w will now unlock all basebands released since 04.26.08, including the updated version found in iOS 4. So get cracking kids, and remember, buckle up, back up, and be safe. Update: 4.01 has already been released to fix an iBook issue.
Thomas Ricker06.23.2010
PwnageTool for iPhone OS 3.1.3 released for the version obsessed
While the list of tweaks is absurdly small in the latest iPhone OS update, we know that some of you simply have to run the latest and greatest OS at all times regardless of risk. Fortunately for you, the Dev-Team has stepped to with a new version of PwnageTool (v3.1.5 for Mac OS X) that handles the update to iPhone OS 3.1.3 with aplomb while preserving your device's ultrasn0w unlock and jailbroken state. As usual, there's a litany of precautions depending upon the device you own so hit the source link and read the dev-team's words carefully before proceeding. With a little luck, patience, and undue stress, improved accuracy of your device's reported battery level can be yours -- Huzzah?
Thomas Ricker02.08.2010iPhone unlocks and jailbreaks continue to work after latest OS update, for a change of pace
Typically, official iPhone OS updates from Apple mean days of hand-wringing in the jailbreaking crowd while the iPhone dev-team and its contemporaries get cracking on updated cracks. Here's a refreshing change of pace, though: with 3.0.1, it's business as usual. Turns out that both redsn0w and ultrasn0w work every bit as well on the latest update as they did on 3.0 -- the only catch is that you currently have to point to the 3.0 file when you're prompted for an IPSW. Yeah, the dev-team says that it's working on an updated version of redsn0w that recognizes the 3.0.1 update, but really, it's a pretty minor inconvenience compared to the usual post-update unlock drama -- not to insinuate that we don't like a little drama from time to time, of course.[Via CNET]
Chris Ziegler08.01.2009
Ultrasn0w for 3G, OS 3.0 is out -- 3GS not yet
If you know what Ultrasn0w is, then you maybe just did a little happy dance. If you don't: it unlocks your iPhone to work on other carriers. If you don't care for AT&T, for example, you can use Ultrasn0w on T-Mobile. One tip: you'll have to disable 3G for T-Mobilers in the US of A. Lucky us, eh? Ultrasn0w doesn't magically add CDMA powers to your iPhone, so give up your dreams, Sprint, Verizon and just-about-everyone-else-customers.[via Engadget]
Victor Agreda Jr06.23.2009Ultrasn0w iPhone 3G unlock for 3.0 is 0ut
Have at it kids, the iPhone Dev-Team's Ultrasn0w unlock for legacy iPhone 3G owners is ready. The unlock works with the original iPhone as well but not the iPhone 3GS; for that you'll have to be patient. Hit the read link to get started on your eight-step program to carrier independence. No donuts or coffee but at least it's free.[Thanks to everyone who sent this in]
Thomas Ricker06.23.2009
Pwnage Tool for iPhone OS 3.0 now live, ultrasn0w still on standby
That iPhone OS 3.0 jailbreak we saw the iPhone Dev-Team pull off earlier this week? It's out now, or at least, part of it is. Pwnage Tool is now flooding torrents, but there's lots of caveats here. Most importantly, this isn't Ultrasn0w, which means if you're wanting to use your toy on T-Mobile or another unofficial carrier, be patient -- it's also worth noting that the jailbreak doesn't jibe with yellowsn0w, so those who rely on it should stay away for the time being. No compatibility with the 3G S, or at least, it probably hasn't been tested... we wouldn't recommend anyone setting the precedent here. You'll need Mac OS X to run it, with QuickPwn for Mac and Windows coming further down the line. Ultrasn0w is also due out at some indeterminate future, so that all said, if you're just needing right now a jailbroken device with spotlight functionality, hit up the read link for all the pertinent details. It should goes without saying, but they're might a few negative side effects to it, and one of the big ones we heard is that YouTube might be fubar'd at the moment.Read - trois, drei, три, három! (Pwnage Tool released)Read - No YouTube On Jailbroken iPhone 3.0?
Ross Miller06.20.2009iPhone 3G running OS 3.0 unlocked, ultrasn0w release coming Friday
The iPhone Dev-Team (no relation) have been teasing us for a little bit now with what they've been saying is an iPhone OS 3.0-compatible version of yellowsn0w, and tonight in a video presentation they unveiled ultrasn0w, which should let you unlock any iPhone on the market, running any version of the firmware from 3.0 on down. The trick to how they're getting the jailbreak hasn't been revealed yet for fear of Apple making a fix at the eleventh hour, but if everything goes according to plan, the new hacking software should be out Friday in time for the iPhone 3G S (no guarantee it'll work on the new device). Hit up the read link to watch the magic happen right before your very own eyes.
Ross Miller06.16.2009