Mwc12
Latest
Neonode zForce uses infrared LEDs to measure pressure, replace capacitive touch (hands-on)
Smartphone fanatics may recall the Neonode N2 -- a rather unique recall-plagued feature phone that ultimately resulted in the demise of the company's handset arm. Neonode is still a major player in the portable device market, but may be more familiar to OEMs that employ its infrared LED-based touch technology, rather than consumers that utilize it in e-readers, with tablets soon joining the mix. zForce offers several advantages over its capacitive-based counterparts -- it's incredibly responsive and accurate, and can now measure the intensity (or pressure) of your touch, and not just position. There's also a built-in proximity sensor that can be added to any device for a few pennies, which is considerably less than traditional offerings. However, because Neonode uses an array of infrared LEDs and photodiodes, a raised bezel is required to accommodate the additional hardware, making it impossible to integrate a flush display.We went hands-on with an updated smartphone-sized embed of the company's zForce technology that not only works with any object, such as a finger, pen or a paint brush, but also recognizes both the pressure of your implement and also its size, so a larger paint brush has broader strokes than a smaller one, for example. Because the device can operate at 500Hz all the way up to 1,000Hz (refreshing 1,000 times per second), it appears to be incredibly responsive, with an almost unnoticeable delay between the time you touch the pad and when your input is displayed on the screen. A second demo unit, called Stargate, offers dual-layer touch with support for 3D control -- you can literally reach inside the unit to manipulate an object. There's no word on when this latest tech will make its way into devices, or how exactly we'll see it used, but you really need to see it in action to get a feel for how it works -- jump past the break for our video hands-on.%Gallery-149305%
Zach Honig03.02.2012
ELVIIS Volvo C30 EV charges from any standard outlet, bills the driver (hands-on)
The electric vehicle is still a fresh enough concept that the issue of redirecting the bill when filling up at a public outlet or a friend's house is of little concern. But once EVs gain more traction and the cost of electricity during that monthly dinner party starts to run upwards of 50 bucks, you'll definitely take notice. ELVIIS, a research collaboration between Ericsson and the Viktoria Institute in Sweden, may be the solution. Instead of pulling power from the grid blindly and billing the outlet's owner, the system provides driver and vehicle information to a server before charging begins, then redirects the cost for power consumed to whatever account you've registered with the vehicle, alleviating any concern about unexpected electricity bills. ELVIIS can theoretically serve other purposes, allowing you to select the least-expensive energy source, for example, or set the car to wait to charge until late-night, when rates are lower.We jumped into the passenger seat of one of five existing ELVIIS cars -- built around an all-electric Volvo C30 -- and poked around the charging interface. The project isn't fully operational just yet, and was running in demo mode so there's no way to verify that it works as described, but it definitely appears to be solid, with Ericsson providing financial and development support. Eventually, it will use the car's GPS to identify nearby power outlets -- for now, you need to enter a specific outlet ID. There's also an Android app that allows you to monitor and reschedule charging, so if you programmed your car to be completely charged by 7AM but realized that you need to leave at 6, you can make sure you're covered without getting out of bed. But you don't need to go anywhere to see it in action -- just click on past the break.
Zach Honig02.28.2012
We're live from Mobile World Congress 2012!
It may be the dead of winter, but you wouldn't know that in Barcelona. The sun's shining bright on Fira, the Spanish city's main exhibition center, as construction crews work furiously (read: gather on staircases for seemingly day-long lunch breaks) to prepare for Mobile World Congress. We've arrived in the Catalonian capital to bring you the latest and greatest from el mundo de la telefonia movil, beginning with tomorrow's manufacturer previews. For now, grab a glass of sangria and enjoy el fin de semana -- the fun begins at dawn.Protip: Use our "mwc2012" tag to see all of this week's Mobile World Congress news and hand-ons!
Zach Honig02.25.2012